ELEIOR SIODP SUOLEUIP E-BIKE SK | 24205-1

ELEIOR SIODP SUOLEUIP E-BIKE SK | 24205-1

Use of chargers
The chargers used in this car are specially manufactured by our company. Please do not use other chargers and do not charge our chargers with vehicles other than those produced by our company. As far as possible, no fast charger is needed to avoid affecting the battery life. Charging should be carried out in a well-ventilated room.

● Do not charge in a surrounding corrosive or flammable gas environment.
● Carefully check whether the rated input voltage of the charger is consistent with the voltage of the power grid. ★Please turn off the power lock while charging.
★ Please connect the power output jack on the charger properly, and then connect the charger input plug into the AC power supply.
★ At this time, the charger: The power supply on the power supply and the red light on the charging instruction are on. The wrapping power is turned on and the charging begins.

It takes about 3, 1 ~ 8 hours to recharge at a time. When the charging indication changes from a red light to a green light. Indicates that the battery is basically adequate to use. Please charge it again for a while. It takes about an hour from the light to disassemble the power supply, then disconnect the AC power first, and then unplug the charging control socket if you ride for a short distance and charge every day. It won’t take long to recharge.

There are four riding modes:

■ Pedal driving

This way of cycling is the same as that of a regular bike. If you don’t need to move quickly, or if you want to save electricity, or when the battery runs out of power, choose your foot to drive.

■ Electric drive

1. Insert the car key into the power switch and turn clockwise to the “ON” gear head instrument; when the power indicator is on, indicating that the power supply is turned on.

2. When riding, the manpower control first, and then the right hand rotates slowly inward and accelerates step by step. You can ride it with electricity. Relax the speed control to reduce the speed until the power supply is cut off.

⚠️ Warning
Do not speed up instantly by holding the handle fast to start to avoid damaging the controller and battery at the same time.

The car has the function of brake power outage, which can cut off the power supply of the motor and ensure the safety of driving.

■ Manual driving

This is both labor-saving and power-saving cycling. When you are driving against the wind or climbing, please exercise in the form of pedal help to avoid excessive load of motor and battery, resulting in damage.

■ Cruising and constant speed driving

When you are driving on a spacious, flat road, you can use this function to save electricity and heart. Second, the use method of brake has the best effect of braking and rebraking.

1. After the speed regulating handle is quickly returned to position, hold the brake and hold the handle.

2. It is ideal to brake slowly when braking, and then tighten it.

3. Do not brake or turn violently. Emergency brake dream steering is the main cause of side skidding and its danger.

CLICK HERE FOR DRYERS